Ozone Tester, Ozone Concentration: 10~500ppm, Size: 150 L

Main Purpose of Ozone Tester: Ozone tester popular used for rubber and plastic indsutry testing work. Ozone in the atmosphere is rarely the main factors of rubber cracking, ozone tester simulation and strengthening the atmosphere of ozone conditions, the study of the role of ozone on the rubber,
Rapid identification and evaluation of rubber anti-ozone aging performance and anti-ozone agent Protective effect of the method, and then take effective anti-aging measures to improve the service life of rubber products, the reference standard such as: GB : T7762-2003, GB : T2951.21-2008

Principles and Methods for Ozone Tester:

● Test method according to the test methods and standards can be divided into “static” and “dynamic”, static is the sample is stretched after the release of the test chamber to do the test, the dynamic is placed in the test box on the fixture, While doing the test, stretching the measured sample itself is about 5% -45%.

● The ozone tester used for: electrical, electronic products, components, parts and materials in high and low temperature environment, storage, transportation and use of the adaptive test. The ozone tester limited/ prohibits: flammable, explosive, volatile substances test or storage of samples; Test or storage of corrosive substances; Test or storage of biological samples; Test or storage of samples of strong electromagnetic emission sources


Ozone Tester


Product Name:Ozone Tester, Concentration: 10~500ppm
Product Model:WEW-OZ-150L-Dynamic
Volume:150 Liters
Testing Room:500*500*600 (W*D*H mm)
External Dimension:900*1000*1700 (W*D*H mm)
Gross Weight:225 Kgs
Power Supply:AC 220 +-5%/ 50 +- 0.5Hz


Main Technical Parameters
Temperature range10C ~ 70C 
Temperature fluctuation+- 0.5C; (Volatility: ± 0.5 ℃; Uniformity: ± 2 ℃)
Temperature distribution accuracy+- 2.0C
Humidity range30% ~ 75% RH (Adjustable)
Humidity fluctuation+- 3%
Humidity distribution accuracy+- 3%
Ozone concentration accuracy10 ~ 500 ppm +-10%
Air flow speed12 ~ 16 mm/s
Shelf rotation rate360 degree rotating sample rack (adjustable speed)
Pull up frequency0-30HZ
Pump speed20L/min
Test gas flow4.7~10L/min or 280-560L/H
Ozone generatorSingle Phase, 220V/ 230V
Ozone exhaust port concentration requirements (optional)Due to the strong oxidizing and micro-toxicity of ozone, ozone should be discharged into the atmosphere at 0.16PPM to prevent environmental pollution.
Ozone absorber (optional)
Used to adsorb ozone and decomposition, reduce ozone, ozone exhaust destroyers using carefully developed rare metal oxide sintering, not afraid of water, in the process, 
Their own produce a certain amount of heat to accelerate the decomposition of ozone. Per kilogram of catalyst can handle up to 1kg of ozone gas, even 150mg / l high concentrations of ozone gas can easily break down into oxygen.


Ozone Tester

(A) Inner box: SUS304 stainless steel plate
(B) Outer case: paint (beige) or SUS-304 stainless steel plate
(C) Insulation for Testing Room & Door: rigid polyurethane foam + aluminum silicate insulation cotton double protection.
(A) Open the door, turn left. window frame / door frame two silicone rubber seal and anti-condensation electric device. Explosion-proof handle; Door hinge: SUS # 304
(B) Doors and windows with observation window above W300xH450 mm, Box light PL lamp 11W; Testing hole: φ50mm, 1 pc
Shelf / Jig requirements 
(A) At both ends of the test specimen to be contacted with ozonized air, the test direction of the specimen shall be substantially parallel to the direction of the airflow; Shell, electronic components, ozone generator, these are major components;
(B) The fixture should be made of a material that is not easily decomposable to ozone (eg aluminum). Equipped with round stainless steel rods of different diameters;
(C) the sample rotation speed between (20 ~ 25) mm / s, in a vertical dry air flow in the plane, each sample at the same time to maintain a fixed rate of rise.
(D) The same specimen is rotated for a week (8 ~ 12) min. The scanning area of the specimen is at least 40% of the effective area of the Ozone Tester.
(E) Specimen preparation shall comply with the requirements of GB / T 9865.1. The sample is best cut from the new mold out of the test piece, if necessary, can be cut from the finished product. Samples should be at least 3 samples per test condition. The length of the standard specimen is not less than 10mm, the thickness of 2.0 mm disabilities 0.2mm, the length of the specimen before the two ends of the specimen is not less than 40mm.
Control Panel:
(A) Controller display
(B) Power switch
(C) Fault alarm; Ozone Testers
(D) Rotating and pulling up the governor
Ozone Tester configuration:
(A) With a stainless steel SUS # 304 rack turntable one
(B) φ50mm lead hole lead hole: 1, and with a hole cover and silicone rubber plug.
(C) 4 casters only for Ozone Tester
(D) Horizontal fixed tripod 4 only
(E) There is a drain hole in the rear of the box to facilitate the condensate drain of the unit; (diameter 8%
(F) Three-phase five-wire system (four-core cable + protective grounding wire) One cable (2.5 meters long).


Air Circulation Adjustment:
Adjustment methodFLOW THROW Air supply mode; Horizontal expansion Vertical heat exchange arc cycle. Ozone Tester
Circulating fansPower-saving motor + stainless steel extended shaft connection multi-centrifugal circulation fan.
Heating System:
Heater control modFin type heat pipe type stainless steel heater heating. PID regulation, actuator: solid state relay.
Refrigeration System:
How it worksMechanical cooling / air cooling for Ozone Testers
Control modeThe controller of the control system automatically adjusts the operating conditions of the refrigerator according to the test conditions. Ozone Testers
CompressorEurope and the United States well – known brands of low – temperature efficient full – (France; Tecumseh)
EvaporatorMulti – stage Automatic Load Capacity Adjustment. (Japan; Heron Palace)
CondenserAir cooling type condenser (Japan; Shuangling) capacity automatic control of the refrigeration system.
Expansion systemDanfoss expansion valve for ozone test chambers; 
RefrigerantsEnvironmentally friendly refrigerant R404 (ozone depletion index are 0). (United States, DuPont)
Refrigeration processNitrogen protection welding, two-stage rotary vane pump vacuum, to ensure that the internal cleaning of the refrigeration system, the bottom of the compressor design water tray, condensate through the rear of the tank drain to the box outside the box.
Cooling accessories
(A) Expansion valve (Danish; DANFOSS)
(B) Solenoid valve (Japan; Omron)
(C) Filters (Danish; DANFOSS); Wewon Ozone Test Chambers Copyrihgt
(D) Pressure controller (Shanghai Feng Shen)
(E) Globe valve (Italy; CASTEL)
(F) Oil separator (Europe and the United States; ALCO)


Ozone Tester

Ozone Detection System:
Ozone generator
Use of voltage silent discharge tube to produce ozone
Ozone generator is the key parts for ozone generate for Ozone Tester
Ozone detection transmitterHigh-precision ozone detection transmitter, the output signal: 4-20MA current signal, with a high concentration alarm device
Ozone exhaust systemAfter the completion of the experiment, the ozone in the test chamber was discharged to the outside through a dedicated exhaust fan and duct
Control System:
SensorsTemperature sensor with platinum DIN PT-100Ω
Imported from South Korea TEMI5.4 inch color LCD touch-type man-machine interface controller, 
Large field of vision screen, with screen lock (LOCK) function.
Controller specifications
(A) Accuracy: ± 0.1 ℃ + 1 digit.
(B) Temperature resolution: 0.1.
(C) Each time setting range: 0.1 seconds to 320 hours can be set freely.
(D) Temperature force signal Platinum PT100 type.
(E) P.I.D control parameter setting, P.I.D automatic calculation.
Screen display function
(A) The use of graphical control software screen chat, the screen direct touch options: including program settings, curve display, historical data, manual operation, automatic operation, auxiliary settings.
(B) Display the execution status, temperature and time set value, remaining time, and the number of remaining cycles.
(C) With a separate program editing screen, you can enter the temperature, time and the number of cycles.
(D) Temperature program settings to graph curve display, with real-time display program curve execution function.
(E) Display the fault status and explain the troubleshooting method.
(F) The temperature setting (SV) is displayed directly with the actual (PV) value.
(G) Screen can be used for backlight adjustment, the screen display protection function can be set, turn off the settings. Ozone Testers
Program capacity and control functions
(A) The production of the program adopt the talk function.
(B) The number of cycles: up to 1-9999 times adjustable.
(C) Available program groups: up to 96 PATTEN (ie 96 test specifications can be set and stored separately)
(D) Each shock time can be set: 0 ~ 540Hour59Min.
(E) Room temperature residence time can be set: 0 ~ 540Hour59Min.
(F) With a power program memory, after the resumption of power automatically and continue to execute the program function. Wewon Ozone Testers Co., Ltd. Copyrihgt
(G) The graphics curve can be displayed in real time when the program is executed.
(H) Has a reservation start and shutdown function.
(I) Has date and time adjustment function.


Ozone Tester

Safety Protection Device:
Cooling protection
(A) Compressor overheat protection switch
(B) Compressor high voltage protection switch
(C) Compressor overcurrent protection switch
Heating protection
(A) Heater surface temperature over temperature protection
(B) Heater short circuit, overload protection device
Other protection
(A) Circulation motor overheat protection
(B) Condenser fan overheat protection
(C) High temperature, low temperature, over temperature protection
(D) Reverse phase, phase failure protection device,
(E) Total power phase sequence and phase loss protection
(F) Leakage protection; heating humidification dry protection
(G) Overload and short circuit protection; power protection
Accessories and Random Information:
Shelf on Ozone TestersSUS304 stainless steel rack 1 (single layer load 10kg)
Power test holePower test hole 1, located in the left side of the box, with a cover and soft plug, size ¢ 50mm × 100mm
Power cord1 PC
Drainage1 PC
Air supply interface1 PC 
Moving Casters4 PCS
Fixing the foot cup4 PCS
Maintenance Manual1 PC
Controller Manual1 PC
Warranty Card1 PC
Equipment Conditions of Use:
Power supplyThe power cord is located behind the machine 
Water sourcesWater supply (requiring users to provide cooling water tower)
Air supplyInterface diameter of 8%, pressure 5 to 8KG
Environmental conditionsTemperature: 5 ℃ ~ 30 ℃ Relative humidity: ≤ 85%; Air pressure: 86kPa ~ 106kPa
Channel requirementsThis equipment is heavy. Please pre-consider the installation site aisle and handling methods (see the main technical indicators outside the size and weight)
Site requirements
(A) The ground is flat and well ventilated; there is no strong vibration around the equipment
(B) There is no strong electromagnetic field around the device
(C) There are no flammable, explosive, corrosive substances and dust around the equipment


Wewon Environmental Chambers Co., Ltd. as a manufacturer and supply Ozone Tester for abroad partners many years ! The mainly product including : ozone tester, Ozone Testers, ozone ometer, environmental chamber, environmental test chamber, climatic chamber, Ozone Chamber, humidity & temperature chamber.


Many thanks for your reading ! I appreciate it ! Meanwhile, I am glad to know you have the inquiry for ozone tester. The related data as above files mentioned, Hope you like it ! For more details check, Please send us a mail. I am waiting for you there ! Thank you.

© Copyright 2014-2018. Wewon Environmental Chambers Co., Ltd.