Today we are doing a sea shipment for a rain spray test chamber. This is a rain spray test chamber for Vietnam customer for LED lamps testing work. The local voltage request is 220V, 50Hz, Single Phase. Max power for this rain spray test chamber is 1.8kW.
This rain spray test chamber with a custom design, It is not only for IP X3 X4 raining test, But also request the water temperature range to be +10C ~ +35C, So we need equip the additional heating system to hot the domestic water to the point temperature based on customer testing requirement.
Meanwhile, There has the water filter installed in the bottom place. This will remove the dust and dirty from the domestic water and make the rain spray test chamber with clean water into the water tank. More technical parameters, Please refer below writing forms.
| ● | Rain Spray Test Chamber Model: WE-LY-1728C-1 |
| ● | Testing Room: 1200 x 1200 x1200 mm (W x D x H) |
| ● | Volume 1728 Liters Rian Spray Test Chamber |
| ● | External Dimensions: 1800 x 1345 x 2100 mm (W x D x H) |
| ● | Test Bench Area: OD 800mm |
| ● | Pipe’s Hole Size: The number of holes 25 pcs |
| ● | Pendulum Tube Water Hole: Diameter 0.4mm |
| ● | Spray Hole Spacing: 50mm, Can be adjusted according to customer’s spec |
| ● | Swing Angle Range: 0°～180°can be set |
| ● | Swing Speed Adjustment: 0～20 times can be set |
| ● | Water Pressure: 80Kpa– 100 Kpa; Test Bench Speed: 1～10r/min |
| ● | Water Supply Quantity: Adjusted according to IPX3, IPX4 Testing |
| ● | Swing Pipe Material: SUS 304; Turntable Speed: 1-5r/min(Accurate Control) |
| ● | Standard: IEC60529; GB/T 16422.38, ASTM/ ISO/ ROHS Certification |
| ● | Inner Box Material: Heatproof and cold resistance stainless steel plate with circumferential welding (SUS # 304) |
| ● | Control Mode: Adopting the digital display table control, and set the parameters automatically according to the test requirement. |
| ● | Observation Window: Install multi-layer hollow rectangular insulated glass windows (310 × 420mm)and there is energy-efficient LED lighting on the window. (Wewon Environmental Chambers Co., Ltd. Copyright) |
| ● | Sample Bearing Course: Sample on one layer is not more than 15 kg; Standard: GB/T 2423.38-2006/IEC 60068-2.18:2000 |
| ● | Operation Mode: IPX3, IPX4 Independent control, Manual Operation |
| ● | Control system with waterproof protection in order to avoid leakage accident. In this way, Keep the operators safe guarantee. |
| ● | Machine Positioning: There are installation of four high-loading corner bearing pulleys and PU wheels at the bottom of the machine to facilitate moving the machine. |
| Water Tank |
| ||||||||||
|
If you have the interest and want to know more for this rain test chamber design, Please go ahead to read the another article as below web link. It is the exactly testing work what our Vietnam customer plan to do. Yes, It’s for LED lamps testing work. We also positively and welcome your technical parameters communicate if you are a technician and professional on the raining test.
https://www.wewontech.com/ip-x3-x4/
If you have the inquiry for the rain test chamber, Please don’t hesitate to contact with us timely. Because we are the right manufacturer for this rain test chamber design. We accept the OEM/ ODM design work. Sometimes, We don’t mark our logo on our rain test chamber, Because it’s custom design. We respect our customer’s requirement and copyright always ! Thank you.